固定污染源廢氣 總烴、甲烷和非甲烷總烴的測定 氣相色譜法，芝麻香白酒，3-甲硫基丙醇，室內空氣，焦?fàn)t煤氣，煉廠氣，過氧化物，增塑劑，塑化劑，乙酸乙酯，醫療器械，口罩，EO

固定污染源廢氣 總烴、甲烷和非甲烷總烴的測定 氣相色譜法
固定污染源廢氣 總烴、甲烷和非甲烷總烴的測定 氣相色譜法 詳細信息：

名稱：總烴毛細管色譜柱

固定相：脫活的毛細管空柱

規格：30m*0.53mm

型號：HH-THC-30

材質：熔融石英

應用：HJ 38-2017 固定污染源廢氣 總烴、甲烷和非甲烷總烴的測定 氣相色譜法

 為貫徹《中華人民共和國環境保護法》和《中華人民共和國大氣污染防治法》，保護環境，保障人體健康，規范固定污染源廢氣中總烴、甲烷和非甲烷總烴的測定方法，制定本標準。本標準規定了測定固定污染源廢氣中總烴、甲烷和非甲烷總烴的氣相色譜法。

HJ 38-2017 固定污染源廢氣 總烴、甲烷和非甲烷總烴的測定 氣相色譜法（發布稿）
本標準于2018-4-1代替 HJ 38-1999
本標準規定了測定固定污染源廢氣中總烴、甲烷和非甲烷總烴的氣相色譜法。
本標準適用于固定污染源有組織排放廢氣中的總烴、甲烷和非甲烷總烴的測定。
當進樣體積為1.0 ml 時，本方法測定總烴、甲烷的檢出限均為0.06 mg/m3（以甲烷計），測定下限均為0.24 mg/m3（以甲烷計）；非甲烷總烴的檢出限為0.07 mg/m3（以碳計），測定下限為0.28 mg/m3（以碳計）。



Waste gas from stationary pollution sources - Determination of total hydrocarbons, methane and non-methane total hydrocarbons - Gas chromatography
Stationary pollution source waste gas Determination of total hydrocarbons, methane and non-methane total hydrocarbons Gas chromatography Details:

Name: Total Hydrocarbon Capillary Column

Stationary phase: deactivated capillary empty column

Specifications: 30m*0.53mm

Model: HH-THC-30

Material: Fused Silica

Application: HJ 38-2017 Waste gas from stationary pollution sources-Determination of total hydrocarbons, methane and non-methane total hydrocarbons-Gas chromatography


 This standard is formulated in order to implement the Environmental Protection Law of the People's Republic of China and the Law of the People's Republic of China on the Prevention and Control of Air Pollution, protect the environment, protect human health, and standardize the determination methods of total hydrocarbons, methane and non-methane total hydrocarbons in waste gas from stationary pollution sources. This standard specifies the gas chromatography method for the determination of total hydrocarbons, methane and non-methane total hydrocarbons in waste gas from stationary pollution sources.

HJ 38-2017 Waste gas from stationary pollution sources-Determination of total hydrocarbons, methane and non-methane total hydrocarbons-Gas chromatography (release)
This standard replaces HJ 38-1999 on 2018-4-1
This standard specifies the gas chromatography method for the determination of total hydrocarbons, methane and non-methane total hydrocarbons in waste gas from stationary pollution sources.
This standard is applicable to the determination of total hydrocarbons, methane and non-methane total hydrocarbons in the waste gas of fixed pollution sources.
When the injection volume is 1.0 ml, the detection limit of this method for the determination of total hydrocarbons and methane is 0.06 mg/m3 (calculated as methane), and the lower detection limit is 0.24 mg/m3 (calculated as methane); non-methane total hydrocarbons The detection limit is 0.07 mg/m3 (calculated by carbon), and the lower limit of determination is 0.28 mg/m3 (calculated by carbon).